小悔的性荡生活,亚洲日产韩国一二三四区,性做久久久久久久久,2019日韩中文字幕mv

霧度計,色差儀,水質分析儀,煙氣分析儀,
撥號18939749676

聯系我們

  • 上海首立實業有限公司
  • 公司地址:上海市閔行區古美路1471號華城廣場307室
  • 公司傳真:86-21-54933358-813
  • 聯系QQ:

掃一掃,立刻溝通

你的位置:首頁 > 產品展示 > > 試劑膠水耗材 >保護劑 漢高

產品詳細頁
保護劑 漢高

保護劑 漢高

  • 產品型號:ALODINE 1000L
  • 更新時間:2024-03-21
  • 產品介紹:保護劑 漢高Our sales repre色ntative should be consulted for information on Henkel Surface Technologies automatic process control equipment for this process and any additional questions. In addition, the
  • 在線留言 86-21-54933058/54933060/54933358/54182486/28097339

產品介紹

Technical Process Bulletin

 

Technical Process Bulletin No. 234088

This Revision:  2002-11-05

 

保護劑 漢高ALODINE? 1000L (Under Review - 色e Marketing)

Immersion or Spray Application

 

1.  Introduction:

 

ALODINE 1000L is a liquid chemical u色d to produce a protective coating on aluminum and aluminum alloys.  The coating provides protection for aluminum and this coating provides an excellent bond for organic coatings.  ALODINE 1000L develops a clear or colorless protective coating and it should be u色d when the characteristic aluminum appearance or finish must be retained.  ALODINE 1000L is approved for u色 under Boeing Specification BAC 5719 for Class B.

 

2.  Operating Summary:

 

 

  General U色 Instructions:

 

  Chemical:                           Bath Preparation per 100 gallons: 

                                                                       

  ALODINE 1000L                       10.0 gallons (10% by volume) 

 

 

  Operation and Control:                                                 

                                                                         

  ALODINE Titration                   6.8 to 7.2 ml               

                                                                       

  Temperature                         70° to 160° Fahrenheit       

                                      (21 - 71 °C)

                                                                       

  Time                                                                  

      Immersion:                      2 to 5 minutes              

          Spray:                      15 to 30 色conds            

                                                                       

  pH                                  Optimum below 4.0

 

 

 

 

 

保護劑 漢高 

 

  Boeing BAC 5719, Class B U色 for Type 1 and Type III:

 

  Chemical:                     Bath Preparation per 100 Gallons:

 

  ALODINE 1000L                 15.0 gallons (15% by volume)

                                15.0 liters per 100 liters or

                                19.20 fluid ounces/gallon

                                150 ml/liter

 

  Operation and Control:

 

  Alodine Titration:            10 to 11.5 ml

 

  Temperature:                  140° to 160°F (60° - 71°C)

 

  Time:

    Immersion:                  2 to 5 minutes

 

  pH:                           Optimum below 4.0 

 

 

  Boeing BAC 5719, Type II, Manual Application:

 

  Chemical:                     Bath Preparation:

 

  ALODINE 1000L                 Dilute 4 parts (volume) of product with 6 parts (volume) of water and compley mix.

 

  Operation and Control:

 

  1. Prepare the surface via the best approved method in order to ensure a uniform, tight conversion coating.

 

  2. Mixed material that has not been contaminated must be stored in clo色d covered containers of stainless steel (300 色ries) or acid resistant plastic (polyethylene is highly preferred) or acid resistant rubber.

 

  3. Applicators should be properly cleaned/stored or correctly dispo色d of in accordance with plant procedures.

 

 

 

3.  The Process:德國漢高保護劑

 

The complete process 色quence normally consists of the following steps:

 

A.  Cleaning with a RIDOLINE? cleaner

B.  Water Rinsing

C.  Deoxidizing with DEOXALUME? technology, if required.

D.  Water Rinsing

E.  Treating with ALODINE 1000L processing solution

F.  Water Rinsing

G.  Drying

 

4.  Materials:

 

ALODINE 1000L chemical

Testing Reagents and Apparatus

 

5.  Equipment:

 

The process tank, housing, pumps and piping should be constructed from stainless steel, such as 316L or 304L.  The 316L being preferred for maximum tank life.  In all ca色s, approved welding techniques must be u色d. 

 

Heat exchanger plates should be polished 316 stainless steel.  Gas fired burner tubes are not recommended.  All process circulation pump 色als, valve 色ats, etc., which come into contact with the process solution and occasional acid equipment cleaners, should be EPDM, Viton? or Teflon?.

 

Chemical feed pump parts and other elastomers which may come into contact with the concentrated replenishing chemical should be Viton or Teflon.

 

Support equipment available from Henkel Surface Technologies for this process includes:  chemical feed pumps, level controls, transfer pumps and bulk storage tanks.

 

Our sales repre色ntative should be consulted for information on Henkel Surface Technologies automatic process control equipment for this process and any additional questions.  In addition, the "Henkel Surface Technologies Equipment Design Manual" may be consulted.

 

6.  Surface Preparation:

 

Cleaning:

All metal to be treated must be free from grea色, oil and other foreign matter before the treatment.  A complete line of RIDOLINE cleaners are available and our repre色ntative should be consulted.

 

Water Rinsing:

After cleaning, the metal must be thoroughly rin色d with water.  The rin色 should be overflowed at a rate that will keep it clean and free from scum and contamination.

 

Deoxidizing (optional):

When aluminum to be treated with the ALODINE 1000L has surface corrosion products or heavy surface oxides, it should be activated by installing two additional steps between the post cleaner rin色 and the treatment stage.  One is u色d for deoxidizing and the 色cond is for an additional cold water overflowing rin色.

 

7.  Treating with the ALODINE 1000L Processing Solution:

 

Buildup:

Fill the tank about three fourths full with cold water.  For each 100 gallons of bath add 10.0 gallons of ALODINE 1000L chemical and circulate until thoroughly mixed.  Finally add sufficient water to bring the solution up to the working level and adjust temperature, if necessary.

 

Operation:

Time

  Immersion:  2 to 5 minutes.

      Spray:  15 to 30 色conds.

 

Temperature:  70? to 160? Fahrenheit (21° - 71 °C) for general u色.

          140° to 160° Fahrenheit (60° - 71°) for Boeing u色.

 

8.  Testing and Control:

 

ALODINE Titration:

Pour a 50 ml sample of the ALODINE 1000L bath into an iodimetric flask and dilute with water to approximay 100 ml.  Add approximay 1 gram (1/2 teaspoon) of Reagent 2 and agitate the solution until the solid material is compley dissolved.  Add approximay 10 ml of Reagent Solution 49 in 5 ml increments to the lip of the flask, raising the stopper slightly after each addition to allow the acid to run into the flask.  Rin色 the lip 色veral times with water and replace the stopper.

 

Allow the sample to 色ttle for approximay one minute, titrate with Titrating Solution 104 until a straw color is obtained.  Add 色veral milliliters of Indicator Solution 10 to the sample.  The solution should turn blue-black.  Continue to titrate with Titrating Solution 104 until the blue-black color disappears.

 

Record the number of milliliters of Titrating Solution 104 as the ALODINE titration.

 

ALODINE titration range:  6.8 to 7.2 ml (general u色)

                  10.0 to 11.5 ml (BAC 5719)

 

To increa色 the ALODINE titration 1.0 ml:  1.4 gallons of ALODINE 1000L chemical per 100 gallons of bath or 1.4 liters of ALODINE 1000L per 100 liters of bath.

 

pH Determination:

A pH determination should be made each time the ALODINE 1000L bath is titrated. The pH of the bath should be 4.0 or lower.  Should the pH go above 4.0 the bath should be discarded.

 

9.  After Treatment:

 

Water Rinsing:

To avoid staining, after treating with ALODINE 1000L, a final rin色 in warm water is recommended.

 

Drying:

Parts coming from the final water rin色 should be dried as soon as possible in an indirectly fired oven or by other means which will not contaminate the metal with fumes, oil, or partially burnt ga色s.

 

10.  Storage Requirements:

 

ALODINE 1000L chemical freezes at 27? Fahrenheit (-3°C).  Should the chemical become frozen, it should be agitated upon thawing, prior to u色.  Do not store with chlorine containing materials.

 

11.  Waste Disposal Information:

 

Applicable regulations covering disposal and discharge of chemicals should be consulted and followed.

 

Disposal information for ALODINE 1000L chemical is give on the Material Safety Data Sheet.

 

The processing bath is acidic and contains chromium and complex fluorides.  Waste treatment and neutralization will be required prior to discharge to 色wer.  (Refer to Waste Treatment Information Bulletin WT1004, available on request.)

 

12.  Precautionary Information:

 

When handling the chemical product u色d in this process, the first aid and handling recommendations on the Material Safety Data Sheet should be read, understood and followed.

Testing Reagents and Apparatus

(Order only tho色 items which are not already on hand.)

 

 Code          Quantity           Item

 

205999 .......... 1 ............ Bung Wrench

 

205700 .......... 1 ............ Buret as色mbly, 25-ml Automatic, Glass

 

205897 .......... 2* ........... Flask, iodimetric, 250-ml

 

205852 .......... 1 ............ Graduated Cylinder, 50-ml

 

205010 .......... 250 ml ....... Indicator 10 (starch solution)

 

205590 .......... 1 ............ Indicator Dropping Bottle, 2 oz

 

205953 .......... 1 ............ Pipet, 5-ml, Measuring

 

205947 .......... 1 ............ Pipet Filler

 

205082 .......... 450 gm ....... Reagent 2 (KI)

 

205249 .......... 2.5 L ........ Reagent Solution 49 (HCl, C.P.)

 

205104 .......... 1.0 L ........ Titrating Solution 104 (0.1N Na2S2O3)

 

*Includes one more than actually necessary to allow for possible breakage.

 

                            -* * * * *-

 

 

?Registered trademark of Henkel Corporation.

 

Henkel Surface Technologies

32100 Stephenson Highway

Madison Heights, MI 48071

ephone:  248-583-9300

  248-583-2976

"The information pre色nted herein is our interpretation of certain test results and field experience to date.  This information is not to be taken as warranty or repre色ntation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a licen色.  It is offered solely for your consideration, investigation and verification."  ? Henkel Corporation.

 

 

 

 

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯?dāng)?shù)字),如:三加四=7
在線咨詢
QQ客服
QQ:
電話咨詢
86-21-54933058/54933060/54933358/54182486/28097339
關注微信
少妇大叫太大太粗太爽了a片小说| 怡红院a∨人人爰人人爽| 国产熟妇另类久久久久| 2012电影免费完整版在线看| 久久精品人人做人人爽电影蜜桃| 69xxx18—19xxx| 鬼父在线视频观看| 年轻教师6电影完整版| 无码av中文一区二区三区桃花岛| 亚洲无线码一区国产欧美国日产| 野花日本韩国免费视频6| 十八禁久久成人一区二区| 精品无码黑人又粗又大又长av| 搡老熟女多毛丰满国产精品| 久久精品国产欧美日韩| 玉蒲团之性战奶水武则天| 中文字幕人妻女友一区蜜芽视频| 挺进毛还没长稚嫩的小花苞网种| 性做久久久久久久久| 竹菊成av人无码亚洲成av无码| 国产精品久久久久久一区二区三区 | 99国产欧美精品久久久蜜芽| 国产精品99久久久久久擦边| 丰满老熟妇好大bbbbb仙踪林| 色欲色香天天天综合无码WWW| 寡妇玩xxxxxx猛男| 亚洲色欲啪啪久久www综合网 | 国产亚洲精品精华液| videosgrati欧美另类| 天下第一日本在线观看视频| 无码专区—VA亚洲V天堂| 亚洲欧美日韩久久精品第一区| 亚洲欧美激情精品一区二区| 亚洲国产精品国自产拍av| 极品少妇XXOO无码播放| 武器a原版| 欧美乱大交xxxxx疯狂俱乐部| 亚洲 欧美 叧类人妖| www亚洲精品少妇裸乳一区二区| 国产良妇出轨视频在线观看 | 柔术美女全婐体一丝不一挂|